James Music Products

"Classic Design merged with Modern Technology"©

Home & Menu

da-Buff!

Tap-It

Swytch-It

Myx-It

MOPS-10

UniversalInputDC

Support

Contact

About


Tap-It is a three-channel switch pedal that provides three fully debounced switch circuits.

Each channel can be set to produce a pulsed or latched output signal.  The channel action is determined by internal jumper plugs.

The pulsed outputs can be configured as active high or active low.  Pulsed outputs will transition from the configured start state to the configured end state, and then return to the start state at each switch press and release.

Outputs defined as Latched will toggle between the two active sates at each switch press.

Each channel has an LED that indicates channel activity; red for HIGH, green for LOW.

Tap-It can also accept external switch pedals.  Plugging a switch pedal into an AUX input will override the internal switch. The external switch pedal must provide a HIGH to LOW signal for Tap-It to respond correctly.


Specs:
    9V to 12V operation, 57mA min - 128mA max (with all outputs loaded with 20mA)
    +/- 20mA channel drive current
    2.1mm DC connector (standard BOSS®)
    Universal Input DC© (polarity of the source doesn't matter)
    External power only, due to current requirements

    Soft-touch foot switches
    Standard 1/4" female input and outputs
    Rugged die-cast enclosure, 10.0"L x 2.8"W x 1.4"H

    Designed and assembled in USA